UG097W

About PictBridge Print Settings

Settings on a PictBridge Compliant Device

Settings on the Machine

Settings on a PictBridge Compliant Device

This section describes the PictBridge function of the machine. For the print settings on a PictBridge compliant device, refer to the instructions given in the device's instruction manual.

Note
  • In the following description, names of setting items are given according to those used in Canon-brand PictBridge compliant devices. Setting item names may be different depending on the brand or model of your device.

  • Some setting items explained below may not be available on some devices. In this case, the settings made on the machine are applied. Also, when some items are set to Default on a PictBridge compliant device, the machine settings for these items are applied.

    PictBridge print settings

  • Depending on the PictBridge compliant device, you can print a photo onto the disc label of the printable disc.

The following settings can be used when printing from a PictBridge compliant device.

Paper size

4" x 6"/ 10 x 15 cm, 5" x 7"*1, 8" x 10"/ 20 x 25 cm, A4, 8.5" x 11"(Letter)

* Can be selected only on certain Canon-brand PictBridge compliant devices. (May not be selected depending on the device.)

Paper type

  • Default (Selections based on the machine setting)

  • Photo:
    Photo Paper Plus Glossy II PP-201/Photo Stickers*

    * When printing on sticker paper, select 4"x6"/10x15cm in Paper size. Do not set Layout to Borderless.

  • Fast Photo:
    Photo Paper Pro Platinum PT-101

  • Plain:
    A4/Letter
    When Paper type is set to Plain, borderless printing will be disabled even when Layout is set to Borderless.

Layout

Default (Selections based on the machine setting), Index, Bordered, Borderless, N-up (2, 4, 9, 16)*1, 20-up*2, 35-up*3

*1 Layout compatible with A4 or Letter-sized paper and Canon-brand sticker above.
A4/Letter: 4-up
Photo Stickers: 2-up, 4-up, 9-up, 16-up.

*2 With a Canon brand PictBridge compliant device, selecting items with "i" mark allows you to print shooting info (Exif Data) in list format (20-up) or on the margins of the specified data (1-up). (May not be available with some Canon-brand PictBridge compliant devices.)

*3 Printed in 35 mm Film Style Layout (Contact Printing Layout). Available only with a Canon-brand PictBridge compliant device. (May not be available with some Canon-brand PictBridge compliant devices.)

Print date & file no.

Default (Off: No printing), Date, File No., Both, Off

Image optimize

Default (Selections based on the machine setting), On (Auto photo fix)*1, Off, Red-Eye*2

*1 The scene or person's face of a shot photo is recognized and the most suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene with the most suitable color, brightness, or contrasts automatically to print.

*2 Can be selected only on certain Canon-brand PictBridge compliant devices. (May not be selected depending on the device.)

Trimming

Default (Off: No trimming), On (follow the camera's setting), Off

Settings on the Machine

You can change the PictBridge print settings from the PictBridge print settings screen. Set the print settings to Default on the PictBridge compliant device when you want to print according to the settings on the machine.

This section describes the procedure to display the PictBridge print settings screen.

  1. Make sure that the machine is turned on.

    Confirming that the Power Is On

  2. Press the MENU button.

    The menu screen is displayed.

  3. Select Setup, then press the OK button.

  4. Select Device settings, then press the OK button.

  5. Use the UPDOWN button to select PictBridge print settings, then press the OK button.

  6. Check the message that is displayed, then press the OK button.

    The PictBridge print settings screen is displayed.

    For details on the setting items:

    PictBridge print settings

    Note
    • If you select Disc label print setting, the Set disc print area screen is displayed to change the disc label print setting.

      PictBridge print settings

Page top